362 products
362 products
Sort by:
Products
-
A USB charger designed by Aspire for use with their range of carbon fibre batteries. Is compatible with various other types of ego battery.Contents
¥ 1 x Aspire USB Charger
Features
¥ Light turns red when charging
¥ Will flash three times and turn solid in colour
¥ Once fully charged, light will turn greenCompatibility: Ego Compatible
Important Safety Notice:
- Do not leave unattended when charging
- Disconnect battery when charging is complete
- Do not connect to charging device witch output greater than 5V or 500mA -
A USB charger designed by Aspire for use with their range of carbon fibre batteries. Is compatible with various other types of ego battery.Contents
¥ 1 x Aspire USB Charger
Features
¥ Light turns red when charging
¥ Will flash three times and turn solid in colour
¥ Once fully charged, light will turn greenCompatibility: Ego Compatible
Important Safety Notice:
- Do not leave unattended when charging
- Disconnect battery when charging is complete
- Do not connect to charging device witch output greater than 5V or 500mA -
Aspire USB-C cable to to effectively charge your favourite USB type C compatible device
-
The Aspire Vilter replacement pods have been designed for use with the Aspire Vilter Pod System only. These have been designed for MTL vaping. They should be paired with 50/50 ratio e-liquid.
Featuring specialist wicks, the Vilter feature a combination wick, that utilises linen and organic cotton.
Key Features:
- Aspire kanthal coils
- Linen and organic cotton wicks
- Compatible with 50/50 e liquid
Pack Contains:
- 2 x Aspire Replacement Vilter paper filter Pods
Please note the coils cannot be removed from the Vilter pods, the entire pod is replaceable.
-
The Aspire INR 26650 3.7V Li-ion 4300mAh rechargeable battery cells are made for normal discharge current (max. 40A) devices. High capacity (4300mAh) provide much longer vaping time.
It is an excellent choice for your vape store to supply a battery to people who are looking for quality 26650 cells.Battery Safety:
- Battery safety is very important. Mistreated batteries can get extremely hot and/or vent which could cause injury. Always follow the following rules to make sure this doesn't happen. We are not liable for misuse of or for mistreated batteries.
- Never completely discharge batteries (below 2.5V under load or 3V unloaded).
- Charge fully (to 4.2V) before first use.
- Never use force to install the battery.
- Use only high quality battery chargers.
- Do not expose to heat.
- Do not connect the positive contact to the negative contact without an appropriate load.
- Be mindful of the current limits in the specifications of the battery and never exceed them.
- Never keep a spare battery loose in a pocket, purse, etc. Always use protective cases for loose batteries. If it shorts against a piece of metal such as keys or coins it can be very dangerous.
- Never charge battery 4.3V or above.
- Do not leave unattended while charging.
- Do not store your Li-ion batteries fully charged for an extended period of time (weeks or more)
- If you must store battery then do it in a case or individual box in cool and dry place at approximately 3.6V - 3.7V.
- Never try to charge or discharge Li-ion batteries with battery chargers that are not specifically made for Li-ion batteries. -
The replacement Aspire AVP Pods have been designed for use with the AVP Pod Kit only. These 2ml pods can be used with a range of eliquids, giving the user more choice over flavour and nicotine strength.the 1.2 Ohm AVP pod is fitted with a NiChrome coil, which heats faster than standard Kanthal for increased flavour. The 1.3 Ohm AVP pod uses a ceramic coil which offers increased flavour from e-liquid.
Contains:
2 x Aspire Refillable AVP Pods
Features:2ml capacity
Refillable
Compatible with high PG eliquids
NiChrome coil / Ceramic coil
Designed for mouth to lung vaping -
The Aspire AVP Cube replacement pods have been designed for use with the Aspire AVP Cube pod only. With a 2ml e-liquid capacity, these pods feature a removable coil method (sold separately) saving on money and plastic consumption for a sustainable vaping experience.
Featuring practical magnetic connectors on the base of the pod, the AVP Cube pods are secure once attached into the device. To refill, simply unplug the bottom silicone stopper and fill with an e-liquid of your choice before securing back in. The press fit coil installation makes replacing and inserting coils a clean and hassle-free process. Employing the AVP Pro coil range, these pods provide generous cloud production with a dedication to clear, long-lasting flavour.
Key Features:
- 2ml E-Liquid Capacity
- Magnetic Connectors
- Removable Coil System
- Press Fit Coil Installation
- Side Fill Silicone Stopper
- AVP Pro Coil Range Compatible
-
With very few spare parts, The Aspire AVP uses its very own pods.The 2ml AVP pod has a capacity of 2ml and houses a 1.2ohm Nichrome coil. The AVP pod is securely and effortlessly by magnets.
-
Product Description
Introducing the Aspire BP Stik, the next-generation sensation in the esteemed BP series! Elevate your vaping journey with this sleek stick-style vape, featuring a robust 2500mAh battery and an impressive 80W maximum power output. Explore the extraordinary with our cutting-edge BP meshed coils, offering a variety of options in 0.17½, 0.3½, 0.6½, and 1.0½ to cater to all your vaping preferences.
Effortlessly tailor your clouds with the adjustable rotating airflow and revel in the freedom provided by our three-level adjustable wattage. Immerse yourself in unparalleled flavor experiences. At Aspire, we assure you that the BP Stik will quickly become your steadfast companion, promising a vaping journey like no other. Join the ranks of satisfied vapers and embrace the unique BP Stik experience today!
Technical Specs
- Battery Type: Built In
- Battery Capacity: 2500mAh
- Draw Type: RDTL
- Charge Rate: 1 Amp
- Charge Method: USB Type C
- Wattage Range: Low/Medium/High
- Compatible E-Liquid:Ê50/50 VG/PG
In the Box
- 1x BP Stik Pod Device
- 1x BP Stik Pod (2ml)
- 1x BP 0.17½ Mesh Coil (Preinstalled)
- 1x BP 0.3½ Mesh Coil
- 1x Type-C USB Cable (0.5m)
- 1x User Manual
-
Product Description
Introducing the Aspire BP Stik, the next-generation sensation in the esteemed BP series! Elevate your vaping journey with this sleek stick-style vape, featuring a robust 2500mAh battery and an impressive 80W maximum power output. Explore the extraordinary with our cutting-edge BP meshed coils, offering a variety of options in 0.17½, 0.3½, 0.6½, and 1.0½ to cater to all your vaping preferences.
Effortlessly tailor your clouds with the adjustable rotating airflow and revel in the freedom provided by our three-level adjustable wattage. Immerse yourself in unparalleled flavor experiences. At Aspire, we assure you that the BP Stik will quickly become your steadfast companion, promising a vaping journey like no other. Join the ranks of satisfied vapers and embrace the unique BP Stik experience today!
Technical Specs
- Battery Type: Built In
- Battery Capacity: 2500mAh
- Draw Type: RDTL
- Charge Rate: 1 Amp
- Charge Method: USB Type C
- Wattage Range: Low/Medium/High
- Compatible E-Liquid:Ê50/50 VG/PG
In the Box
- 1x BP Stik Pod Device
- 1x BP Stik Pod (2ml)
- 1x BP 0.17½ Mesh Coil (Preinstalled)
- 1x BP 0.3½ Mesh Coil
- 1x Type-C USB Cable (0.5m)
- 1x User Manual
-
The Aspire BP60 replacement pods have been designed for use with the Aspire BP60 pod kit only. With a 2ml e-liquid capacity, these pods feature a removable coil method (sold separately) saving on money and plastic consumption for a sustainable vaping experience.
Features:
- 2ml E-Liquid Capacity
- Magnetic Connectors
- Removable Coil System
- Press Fit Coil Installation
- Side Fill Silicone Stopper
- BP Coil Range Compatible
Featuring practical magnetic connectors on the base of the pod, the BP60 pods are secure once attached into the device. To refill, simply unplug the side silicone stopper and fill with an e-liquid of your choice before securing back in. The press fit coil installation makes replacing and inserting coils a clean and hassle-free process. Employing the BP coil range, these pods provide generous cloud production with a dedication to clear, long-lasting flavour.
-
The Aspire BP replacement coils have been designed for use with the Aspire BP60 and BP80 Pod Kits and pods only. These coils are available in two separate variants, as a 0.17 Ohm, 0.3 Ohm mesh coil or a 0.6 Ohm double shot coil, depending on the userÕs preference.
Key Features:
- Sub Ohm Coils
- Long-Lasting Lifespan
- Mesh / Dual Wire Build
- 0.17 Ohm Resistance
The 0.17 Ohm mesh coil features a larger surface area to heat e-liquid, resulting in rich flavour and enhanced cloud production, recommended to be paired with high VG e-liquids of 60% and above.
-
The Aspire BP replacement coils have been designed for use with the Aspire BP60 and BP80 Pod Kits and pods only. These coils are available in two separate variants, as a 0.17 Ohm, 0.3 Ohm mesh coil or a 0.6 Ohm double shot coil, depending on the userÕs preference.
Key Features:
- Sub Ohm Coils
- Long-Lasting Lifespan
- Mesh / Dual Wire Build
- 0.3 Ohm Resistance
The 0.3 Ohm mesh coil features a larger surface area to heat e-liquid, resulting in rich flavour and enhanced cloud production, recommended to be paired with high VG e-liquids of 60% and above.
-
The Aspire BP replacement coils have been designed for use with the Aspire BP60 and BP80 Pod Kits and pods only. These coils are available in two separate variants, as a 0.17 Ohm, 0.3 Ohm mesh coil or a 0.6 Ohm double shot coil, depending on the userÕs preference.
Key Features:
- Sub Ohm Coils
- Long-Lasting Lifespan
- Mesh / Dual Wire Build
- 0.6 Ohm Resistance
the 0.6ohm variant features a fast ramp up time as well as a lengthy lifespan due to quality construction. The 0.6 Ohm coil features a dual wire coil build, guaranteeing clear taste throughout, recommended to be paired with high PG e-liquids of 50% and above.
-
The Aspire BP replacement coils have been designed for use with the Aspire BP60 and BP80 Pod Kits and pods only. These coils are available in two separate variants, as a 0.17 Ohm, 0.3 Ohm mesh coil or a 0.6 Ohm double shot coil, depending on the userÕs preference.
Key Features:
- Sub Ohm Coils
- Long-Lasting Lifespan
- Mesh / Dual Wire Build
- 1.0 Ohm Resistance
The 1.0 Ohm mesh coil features a larger surface area to heat e-liquid, resulting in rich flavour and enhanced cloud production, recommended to be paired with high VG e-liquids of 60% and above.
-
Aspire Breeze and Breeze 2 Coil is Optimised for robust flavour recreation in smaller devices. The structure design of the coil features a top-airflow intake that travels down through the vertical spacing of the coil, then passes up through the other air-slot for a U-formation. It is constructed with superior stainless steel encasing the core of Kanthal heating elements and organic cotton.The structure design of the coil features a top-airflow intake that travels down through the vertical spacing of the coil, then passes up through the other airslot for a U-formation. It is constructed with superior stainless steel encasing the core of Kanthal heating elements and organic cotton.
Key features:
- Available in 0.6ohm, 1.2 ohm and 1.0 ohm designed for Nicotine Salt Liquids
- Kanthal Heating Element
- U-Shaped Cylinder Structure
- 100% Organic Cotton
- Stainless Steel Construction
-
The Aspire multi-compatible BVC coils for use with the K1 Clearomiser Aspire CE5, Aspire ET-S and the Aspire K2 quick Start Kit. Slightly different design to that of the Nautilus BVC, but the same technology that makes them so good. NOTE: THESE BVC COILS ARE NOT COMPATIBLE WITH THE NAUTILUS AND NAUTILUS MINI TANKSKey Features:
- Available in 1.6 and 1.8Ohm
Pack Contents:
- 1 x 5 pack of Aspire BVC Coils
Compatibility:
For use with the K1 Clearomiser, Aspire CE5, Aspire ET-S and the Aspire K2 Quick Start Kit, Aspire Spryte Kit
-
Made for the Aspire Cleito 120 Tank, the Aspire Cleito 120 coils are high-performance replacement coils built for huge clouds and extreme flavour.Also compatible with the Aspire Cleito 120 Pro and Cleito Exo, the classic Cleito 120 coil has a resistance of 0.16 ohms, these are ideally used between 100 and 120 Watts.
Pack Contents:
¥ 1 x 0.16Ohm Cleito 120 Coil
-
The Aspire Cleito uses a revolutionary new coil design that frees up even more restriction in the airflow by eliminating the need for a static chimney within the tank itself. This results in an expanded flavour profile and increased vapor production. Combined with a clapton kanthal coil for maximum flavour.
Key Features:- New revolutionary Design Great Flavour Great Vapour Production
- Available in 0.2 ohm,0.27ohm and 0.4ohm
Pack Contents:
- 1 x 5 pack of Cleito Atomizer Coils
-
The Cleito pro coil is rated at 0.5 ohms and 60-80 wattsPack Contents:
- 1 x Aspire Cleito PRO Replacement Atomizers - 5 pack
Compatibility:
- The Cleito PRO 0.5ohm coils are compatible with the Cleito, Cleito EXO and Cleito PRO tanks.
-
The Cleito mesh coil is rated at 0.15 ohms and 60-80 watts, and like all mesh coils, will further enhance flavour.Pack Contents:
- 1 x Aspire Cleito mesh Replacement Atomizers - 5 pack
Compatibility:
- The Cleito Mesh coils are compatible with the Cleito & Cleito EXO tanks.
-
The Aspire Cloudflask replacement coils are designed for use with the Aspire Cloudflask pod kit and replacement pods only. These sub ohm coils feature a mesh wire construction providing a lengthy lifespan as well as enhanced flavour and cloud production.
Providing a larger surface area to heat e-liquid, due to the mesh structured coil, clear flavour is delivered consistently. A practical push fit system makes installing the coils into the pods a simple process. With a 0.25 Ohm resistance, these coils are best suited to high VG e-liquids of 60% and above for optimum performance.
Key Features:
- Sub Ohm Vape Coils
- Mesh Coil Structure
- 0.6 Ohm Resistance
- Suited To High VG E-Liquids
Pack Contents:
- 3 x Aspire Cloudflash Mesh 0.6 Ohm Coils
-
The Aspire Cloudflask replacement pods are designed for use with the Aspire Cloudflask pod kit only. Operating a removable coil system for an eco-friendly and cost-effective approach, these refillable pods utilise the Cloudflask mesh coils (sold separately).
Features:
- 2ml E-Liquid Capacity
- Removable Coil System
- Resin 810 Drip Tip
- Direct To Lung Inhale
- Compatible With Cloudflask Mesh Coils
- Suited To High VG E-Liquids
A practical design is embellished with the inclusion of a resin 810 drip tip to complement the DTL (Direct To Lung) inhale. To refill the Cloudflask pods, simply unplug the silicone stopper on the base of the pod and fill with an e-liquid of your choice. An efficient pull and push replaceable coil method allows for an easy installation and change over of coils. We recommend pairing these pods with high VG e-liquids of 60% and above for best results.
Contains:
- Aspire Cloudflask 2ml Replacement Pod
